Vinotemp VT-TC32G Operations Instructions download pdf (Page 9)

INSTALLATION INSTRUCTIONS

Before using your wine cellar

• Remove the exterior and interior packing

• Check to be sure the following parts are included:

o For VT-12TEDi, 3 Slide out shelves

o 1 Instruction manual

• Before connecting the appliance to the power source, let it stand upright

for approximately 2 hours. This will reduce the possibility of a malfunction

in the cooling system from handling during transportation.

• Clean the interior surface with lukewarm water using a soft cloth.

INSTALLING YOUR WINE CELLAR

• Place your appliance on a floor that is strong enough to support the

appliance when it is fully loaded. To level your appliance, adjust the front

legs at the bottom of the appliance.

• Unit must be placed as a freestanding unit—not to be built in.

• For proper installation, keep away from direct sunlight and sources of

heat (stove, heater, radiator, etc.). Direct sunlight may affect the

coating and heat sources may increase electrical consumption. Extreme

cold or hot ambient temperatures may also cause the appliances not to

perform properly.

• Not designed for placement in garage or basement. Designed for use

inside the home.

17621 South Susana Road, Rancho Dominguez, California 90221

info@vinotemp.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Vinotemp VT-TC32G Operations Instructions Page 9