Vinotemp VT-12TEDTS-2Z Operations Instructions Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
WWW.VINOTEMP.COM
PROBLEMS WITH YOUR WINE CELLAR
You can solve many common wine cellar problems easily, saving you the
cost of a possible service call. Try the suggestions below to see if you can
solve the problem before contacting Vinotemp at [email protected]
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Wine cellar does not
operate
Check if unit is plugged in.
Check if using wrong voltage.
Check for broken fuse.
Wine cellar is not cold
enough
Check the temperature control setting.
Ensure the wine cooler is away from heat sources and
direct sunlight.
The wine cellar does not have the correct clearance on
all sides of the wine cooler.
Ensure door is properly closed and fans are operating
correctly.
Light does not work Call the service center.
Wine cellar makes too
much noise
The wine cellar is not level.
Check the fans inside the cooler and at the back of the
unit.
Check for proper ventilation and clearance.
Internal light is
flashing
Check that selected temperature is not higher than
internal cabinet temperature.
Automatic defrost function has started. This is a
normal function.
Wine cooler has
started to frost
Excess humidity or very low temperatures may cause
frost to build. Unplug the cooler and allow it to defrost
or defrost by hand.
Door will not close
properly
The wine cellar is not level.
The doors were not properly installed.
The seal is weak.
The shelves are out of position.
Temperature LCD
display is blank
Main control board does not work.
The Power Control Board is not functioning.
There is some problem with the plug (no power
supply).
Temperature LCD
display error
Temperature sensor is cut off.
Display suffered too much wear and tear.
Buttons are not
functional
Temperature controller panel is damaged.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments